BVTDR - 8046 JET SHIELD
- MSDS: BVTDR
- Manufacturer: EZE PRODUCTS INC (FORMERLY INTEX CHEMICAL DIV)
- Product Name: 8046 JET SHIELD
- National Stock Number: 6850-00F037142
Product Identification
Product ID:8046 JET SHIELD
MSDS Date:01/02/1990
FSC:6850
NIIN:00F037142
MSDS Number: BVTDR
Responsible Party
GREER, SC 29650-5000
US
Emergency Phone: 803-879-7100
Info Phone: 803-879-7100
Cage: EZEPR
Contractor
Telephone: 803-879-7100 OR 803-297-4246
Cage: 78304
Ingredients
MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES
CAS: 64742-88-7
Fraction By Weight: 40%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
MORPHOLINE (IARC CANCER REVIEW GROUP-3) *94-3*
CAS: 110-91-8
RTECS: QD6475000
Fraction By Weight: <1%
OSHA PEL 20 PPM TWA
ACGIH TLV: 20 PPM TWA
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: MAY BE FATAL. GI TRACT
PROBLEMS MAY OCCUR. EYES/SKIN: SEVERE DAMAGE W/REPEATED CONTACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:RED, DRY & FISSURED SKIN, IRRITATION, INTERNAL
DISORDER.
First Aid
First Aid:EYES: FLUSH FOR 15 MINS. SKIN: WASH W/SOAP & WATER
INHALATION: REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF NECESSARY.
INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point:146F
Extinguishing Media:WATER, FOG, CO2.
Fire Fighting Procedures:APPROPRIATE METHOD FOR FIRE SOURCE.
Accidental Release
Spill Release Procedures:COLLECT W/ABSORBENT MATERIAL, DRUM FOR
LANDFILL. FLUSH RESIDUE W/WATER.
Handling
Handling and Storage Precautions:STORE AWAY FROM ACIDS, BASES &
OXIDIZERS. WEAR EYE PROTECTION & GLOVES WHEN HANDLING MATERIALS.
Exposure Controls
Respiratory Protection:NIOSH APPROVED RESPIRATOR.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:EYEWASH & SAFETY SHOWER.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:0.968
Solubility in Water:INSOLUBLE
Appearance and Odor:THICK WHITE LIQUID W/SOLVENT ODOR
Percent Volatiles by Volume:81
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS, BASES, OXIDIZERS
Stability Condition to Avoid:HEAT/FREEZING
Conditions to Avoid Polymerization:INTENSE HEAT/FREEZING
Disposal
Waste Disposal Methods:DISPOSE IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.